Categorized | Free Voip

How to Unlock your Linksys SPA2102-R

Please rate 5 stars if this helps you! I got an old Sunrocket/Teleblend Linksys (sipura) SPA2102-R from eBay. It was locked. I beat my head against a wall for 3 hours before I finally figured out how to unlock it. It’s not hard, but this video would have helped me. Now that I’ve got it working, I can use it on any VoIP network I want. This is a good place to read the steps, as with a few more pieces of information.

Share This Post

25 Responses to “How to Unlock your Linksys SPA2102-R”

  1. ooglek says:

    @usathyan Glad I could help!

  2. usathyan says:

    Thanks for doing this. This has been a godsend!

  3. eurekamas says:

    Thank you. It worked.
    I had to use another website as a reference because the video did not mention that the main requirement is to have a router with a special firmware such as DD-WRT:
    (because regular routers do not allow you to set the router IP as a real IP)
    I was afraid of doing the factory reset which other sites tell you not to do but It all worked out in the end

  4. aamiraziz78 says:

    hi Dear Sir
    i have cisco linksy pap2t but i have to forget my passworld
    let me know how to i open them
    plz help me i
    thank you so much

  5. ngot74 says:

    I tried this on a SPA2102 from Internet Telephone Provider (ITP). The unit downloaded the cfg from my web server (as witnessed from the web server logs and sniffer) and but the password 79309925 did not work. Can anybody help me?

  6. ngot74 says:

    I tried this on a SPA2102 from Internet Telephone Provider (ITP). The unit downloaded the cfg from my web server (as witnessed from the web server logs and sniffer) and but the password 79309925 did not work.

  7. wholeNwon says:

    I’d like to unlock a SPA-2100 locked to Earthlink (EL). I can make most admin. changes except auto provisioning. Have been unable to find appropriate .cfg files to use your technique. Earthlink CS was no help, of course. Any thoughts you’d like to share?

  8. asdgfir50954nsale says:

    @ooglek What about a Lingo Linksys SPA2102-R?

  9. z3bmw007 says:

    The actual MAC address he refers to is the one displayed on his screen. Mine SPA adapter was unlocked using the MAC address he used no mine. Try the MAC address he uses.

  10. nobodypickthis says:

    wats the default ip of that?

  11. lwvmobile says:

    Thanks for the video, just bought one from a thrift store today for 3 bucks, thought it might come in handy so I picked it up. Question: You say this will work with any voip, does that include skype?

  12. sgamer61 says:

    I’ve tried a variety of methods to unlock my Gizmo an they all rely on a password which never works for mine. Is there a list of passwords that might work somewhere? Is there something I’m doing wrong? What other reasons could be the cause of the password failures?

  13. djfixxx says:

    We bought 24 SPA2102-R’s DIRECTLY from Sunrocket as we know them.
    We were going to buy more if this worked.

    Out of the box I tried this and it DOES NOT WORK ON THE 2102R
    You can try them if you want for $5.

  14. djfixxx says:

    Does anyone have a better breakdown including the Apache Server and where the directory and files are placed?

  15. ooglek says:

    I can understand that.

    You need to find and download the linksys2102-sunrocket.cfg file. Then you rename that file to your mac address with a .cfg suffix. For example, 001122334455.cfg if your Mac Address was 00:11:22:33:44:55.

    Sorry for the confusion.

  16. tainscough says:

    Thanks for the nice video. I think there are a few gaps that will make it impossible for the average user to follow, though.

    The big one for me is that we are told to find and download an important file called “linksys2102-sunrocket.cfg”. Well and good.

    A few minutes later we are told about an important file whose *name* should match our MAC address (but not what the contents of this file should be) and that “linksys2102-sunrocket.cfg” is not really important.


  17. kofi7777 says:

    How do you know it is a SunRocket. I was using 5Linx and when we pull up the Admin it say “Customized” 5Linx. Has anyone cracked this situation yet?

  18. bigmikedeals says:

    Hey chief, you did a very good job.!

  19. itzkrisyall says:

    thanks, it took 4 months for someone to help me thank you very much. :)

  20. jesuitson says:

    **Correction** You log onto it through the LAN port on the SPA after reset, not the WAN port. WAN configuration is disabled by default but you can turn it on in the admin menu. Turning on WAN configuration is how you can put these behind a router and yet still have access to the settings. This is how I have mine set up.

  21. jesuitson says:

    Reset the SPA with it disconnected to the internet. This clears the password. Then log onto it and turn off provisioning before hooking back up to the internet.

  22. jesuitson says:

    These devices automatically set a password whenever they are hooked up to the internet. If you disconnect them from the internet and then reset them, there will be no password. You have to turn off provisioning before you can hook it back up to the internet.

    They default to LAN administration. You can log onto it and enable WAN administration so that you can put it behind a router, yet still get into it.

  23. jesuitson says:

    Temporarily disconnect from the internet. Pick up the phone and dial **** then dial 73738# (RESET). Now log into your SPA. You will need to be hooked up to the internet port of the SPA. Best to go through a router. Now you can log on with no password. Go to admin, advanced and then provisioning. Turn provisioning to “NO”.

    This will clear the password of ANY SPA-2102 regardless of provider. Now you can do as the video shows. Just skip the password step.

  24. itzkrisyall says:

    Well I did mine in a different way by factory reset code, cause i have a different VOIP carrier, i don’t think you can help me then? oh well :(

    BUT do you know if the spa2102 has a default password for admin panel cause i’m locked out :( I have the right to know

  25. ooglek says:

    Did you even watch the video? If you didn’t set things up as described, or if the SPA2102 you have isn’t from Sunrocket, then I personally won’t be able to help you any more than what’s already posted.


Leave a Reply


July 2016
« Oct